5                                                                        ixL PC

Fitting a PCIex card

 

To fit a low profile PCIex card, after removing the lid, simply remove the PCIex card block (2x small pozi-drive screws) from the rear plate, and then position the PCIex card above the PCIex slot, and poke it through the hole in the chassis at the back (slightly angle the card).

 

 

 

Then press the PCIex card into the main board slot.

 

 

You can then replace the PCIex card block back onto the chassis, and use an M3 screw (from the underside) to fasten the PCIex card to the PCIex card block.